- Brand: Michell Instruments
Tags: Easidew, Sampler, low-cost, self-contained, sampling, system, with, filtration, and, flow, control, Michell, Instruments
The Easidew Sampler is a general purpose sampling system that
allows easy measurement of the dew point in many compressed
air and industrial gas applications.
The Easidew Sampler provides all the necessary components
to allow a sample of gas under test to be conditioned for
measurement either at atmospheric or full line pressure; the
two most commonly demanded sampling conditions. Easidew
Sampler provides fl ow and pressure regulation as well as an
in-line particulate fi lter and the sensor housing, all in a single
integrated block assembly. The system is provided with a multidirectional
mounting bracket for easy mounting on a panel,
post, or pipe brace.
Product Features
- Universal configuration for atmospheric or line pressure dew point measurements
- Integral particulate filter
- Metering valve for flow control
- Single block design for faster measurement response
- Gas pressure to 145 psig (high pressure option to 3000 psig available)
Technical Specification
| GENERAL | |
| Gas Flow Rate | 1 to 5 l/min (2 to 10 scfh) |
| Operating Pressure | 145 psig (high pressure option to 3000 psig) |
| Particulate Filter | 99.5 % removal of 0.3 microns |
| Gas Connections | Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok tube fittings (PTFE or FEP recommended) |
| Sample Tube | Supplied with 0.5m (19.6") pig-tail vent tube, to prevent back-diffusion |
| Vacuum Rating | Standard push fittings are not vacuum rated |
| Materials of Construction | Block and Cap : 316 Stainless
Steel Flow control block: Aluminium Couplings: Nickel plated Brass |
| Sensor Port | 5/8” UNF to support all Michell Instruments impedance sensors/transmitters |
| Environmental | IP66 (NEMA 4) |
| Operating Temperature | -40 to +60°C (-40 to +140°F) (or as determined by sensor specification) |
| Storage Temperature | -40 to +70°C, 0-95 %RH non-condensing (-40 to +158°F) |
| Weight | 1.1Kg (2.4lbs) or 1.3Kg when sensor installed (2.9lbs) |
|
OPTIONS AND ACCESSORIES: Sampling tube - 6mm and ¼ O/D thick wall PTFE sampling tube is available to customer specific length Spare filter cartridges - Available in packs of ten cartridges, 99.95 % retention at 0.3 micron High pressure version - High pressure configuration with 0.25" O/D compression fittings and high pressure rated valve is available Flow meter - Scaled from 1 to 5 l/min (2 to 10 scfh) at one atmosphere can be installed at system outlet |
|
|
|
