- Brand: Michell Instruments
Tags: Easidew, Portable, Hygrometer, Michell, Instruments
The Easidew Portable Hygrometer has been designed to make spot checks of
the dew point in air and gases as simple as possible. This completely
self-contained instrument weighs only 4kg and is delivered ready to use.
Simply connect your sample gas to the Quick Connect fittings, turn on
the instrument and it will automatically begin to measure the dew point
of the applied sample.
Product Features
- Wide measurement range
- Simple operation
- Integral sampling system
- Rugged industrial case
- ±2°Cdp (±3.6°F) accuracy
- Traceable to National Standards
- 16 hours of operation between charges
- Lowest cost of ownership due to minimal maintenance
Technical Specification
| Performance | |
| Measurement technology | Michell Ceramic Moisture Technology |
| Measurement range | Spot Checks: -40 to +20°Cdp Online: -100 to +20°Cdp |
| Accuracy | ±2°Cdp (±3.6°Fdp) |
| Run time | 12-16 hours |
| Charge time | 16 hours for maximum charge |
| Electrical input/output | |
| Output | 4-20 mA current maximum load resistance 400 Ω |
| Power supply | Rechargeable NiMH battery pack, charger included |
| Operating conditions | |
| Operating temperature | -20 to +50°C (-4 to +122°F) |
| Storage temperature | -40 to +75°C (-40 to +167°F) |
| Operating pressure | 0.1-2 MPa (1-20 barg/14.5-290 psig) standard up to 30 MPa (300 Barg/4351 psig) with optional Swagelok® couplings |
| Mechanical specification | |
| Display | Flush mounted 3.5 digit red LED |
| Case | Yellow propylene with charger, sample tubing and output connector stored in the lid |
| Weight | 4 kg (8.8 lbs) total weight |
| Enclosure rating Case closed: NEMA type 6 | |
| Sample connections | Push fit pneumatic fittings or optional high pressure 6mm Swagelok® Stainless Steel Tube Fittings |
| Sample block | Stainless steel, fully self-contained sample system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge |
| Filter cartridge | Removes 99.5% of particles ≥ 0.3 micron supplied with cartridge installed Spare cartridges are available (part no: SSF-PF-10PK) |
| Interchangeability | Sensor is fully interchangeable with other Easidew products |
| Sample tubing | 2m (6.5ft) of 6mm (0.24in) O/D PTFE supplied |
